JINYU Machinery Worm and Worm Gear accept OEM
Worm drive
Worm drive refers to the main action of the worm deceleration drive, when the anti-travel is not self-locking, it can also be worm wheel-based action to increase the speed drive. Transmission power should generally be below 50kW (maximum up to 1000kW or so), the relative sliding speed between the tooth surfaces should be in the Below 15m/s (up to 35m/s).
Worm drive consists of worm and worm wheel, general worm for the active part. The worm and threads are the same as the right-hand and left-hand points, respectively, known as a right-hand and left-hand worm.
Features
1.Large transmission ratio, compact structure. The worm head number with Z1 said (general Z1 = 1 ~ 4), the number of worm gear teeth with Z2 said. From the ratio formula I = Z2/Z1 can be seen, when Z1 = 1, that is, the worm for a single head, the worm shall turn Z2 worm wheel before Turn a turn, so you can get a large transmission ratio, generally in the power transmission, take the transmission ratio I = 10-80; in the indexing mechanism. Such a large transmission, for example with gears, requires a multi-stage drive, so worm drives, for example, can be up to 1000. Compact structure, small size, and lightweight.
2.Smooth transmission, no noise. Because the worm gear teeth are continuous uninterrupted helical teeth, it meshes with the worm gear teeth continuously, the worm gear teeth do not enter and exit the meshing of the process, so it works smoothly with less shock, vibration, and noise.
3.With self-locking. The spiral angle of the worm is very small, the worm can only drive the worm drive, and the worm wheel can not drive the worm rotation.
4. Worm drive efficiency is low, the general view of the worm drive efficiency than gear drive low. Especially with self-locking worm drive, its efficiency at 0.5 below, general efficiency only 0.7 ~ 0.9.
5. Heat generation, the tooth surface is easy to wear, high cost.
Read more successful projects:
JINYU MACHINE ADVANTAGES
1.We insist on choosing brand suppliers to supply high-quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products for the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities, and special markings in the invoice or sales contracts as the second time. After that, fill in the inspection report with signature and company stamp.
3. 100% safety transportation. Packing with strong standard export plywood case materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. International sales engineers have professional knowledge and skills in our standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. Custom design available, OEM service available, Free engineering advice, Free quotes available and Customer label available.
6. Inspection equipments include motor with inverter drive system, height adjustment motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc.
7. Processing with modern advanced machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes, and others equipments.
